i3 Rex engine warning light and OBD port location

For all things i3 and i8........so far!

i3 Rex engine warning light and OBD port location

Postby emver » 09 Oct 2017, 21:22

I'm not sure if there are many i3 owners on this forum, but I'll post this anyway.

The engine warning light has come on on our i3 Range Extender. The petrol engine on our vehicle is rarely used and I doubt whether it has run for more than a few hours in total since new.

At this moment the car shows a petrol range of around 70 miles and an electric range of around 50 miles. The petrol engine never starts up unless the electric range is below 10 miles, from memory. So at the moment the petrol engine isn't required.

Any ideas as to what could cause the Check Engine Light to come on? I've read that it was a very common problem with i3 Rex models in the US, probably fixed by a software update. Have any UK owners experienced similar problems or had software updates?

My second question relates to the first. I want to plug in my code reader to investigate any fault codes, but I can't find any sign of the OBD port. It should be somewhere between the steering whell and driver's door, but there's nothing! Can anybody help?
emver
BMW Enthusiast
 
Posts: 5
Joined: 26 Apr 2017, 17:08
Has thanked: 0 time
Been thanked: 2 times
Car model: 320d E91
520d F11
Z3 2.8
i3 Rex
Location: warks

Re: i3 Rex engine warning light and OBD port location

Postby RayB » 09 Oct 2017, 21:37

On the other side perhaps......

User avatar
RayB
Site Owner
 
Posts: 13805
Joined: 17 Oct 2011, 12:06
Location: Essex
Has thanked: 3504 times
Been thanked: 4397 times
Car model: 1998 E36 M3 Convertible

Re: i3 Rex engine warning light and OBD port location

Postby emver » 09 Oct 2017, 22:53

Many thanks for your reply Ray, but in my car that cover flap just isn't there on either side. I'll check with Sytners tomorrow.
Regards
Mike
emver
BMW Enthusiast
 
Posts: 5
Joined: 26 Apr 2017, 17:08
Has thanked: 0 time
Been thanked: 2 times
Car model: 320d E91
520d F11
Z3 2.8
i3 Rex
Location: warks

Re: i3 Rex engine warning light and OBD port location

Postby emver » 13 Oct 2017, 23:43

I've spoken to Sytners and it seems that there's a recall or an update relating to this issue, so the car is booked in for later this month.
emver
BMW Enthusiast
 
Posts: 5
Joined: 26 Apr 2017, 17:08
Has thanked: 0 time
Been thanked: 2 times
Car model: 320d E91
520d F11
Z3 2.8
i3 Rex
Location: warks


Return to BMW I-Series Forum

Who is online

Users browsing this forum: No registered users and 1 guest